HTE High otutu Elongation Ejò bankanje
●Sisanra: 12um 15um 18um 35um 70um 105um
●Iwọn Iwọn: 1290mm, le jẹ gige bi ibeere iwọn
●Onigi apoti package
●Didara naa da lori GB/T5230-1995 ati boṣewa IPC-4562
●ID: 76 mm, 152 mm
●Ipari: Adani
●Ayẹwo le jẹ ipese
Awọn ile-ti ni idagbasoke itanran-ọkà ati ki o ga-agbara Ejò bankanje ti kekere dada roughness ati ki o ga-otutu išẹ ductibility.Iwe bankanje yii ṣe ẹya awọn irugbin ti o dara ni deede ati imudara giga ati pe o le ṣe idiwọ awọn fissures ti o ṣẹlẹ nipasẹ aapọn gbona, nitorinaa o dara fun awọn ipele inu ati ita ti igbimọ multilayered kan.Pẹlu ipele kekere ti roughness dada ati etchability ti o dara julọ, o wulo fun iwuwo giga ati tinrin.Pẹlu agbara fifẹ ti o dara julọ, o ṣe iranlọwọ lati mu irọrun dara si ati pe a lo ni akọkọ ninu PCB multilayer bakanna bi awo fifẹ.Pẹlu ifarabalẹ ti o dara julọ ati lile, kii ṣe ni rọọrun ya ni eti tabi agbo, ni ilọsiwaju iwọn imudara ọja pupọ.
●Awọn mu bankanje ni grẹy tabi pupa
●Agbara peeli giga
●Ti o dara etchability
●O tayọ ipata resistance
●Anti bankanje wo inu nipa ga elongation ni pele otutu
●Giga elongation lẹhin itọju pẹlu iwọn otutu giga tabi annealing.
●Ga THE ohun ini.
●Munadoko ni idena ti wo inu awo.
●Polyimide ọkọ
●Epoxy ọkọ
●CEM-3, FR-4, FR-5, Hydrocarbon sobusitireti
●Multilayer ọkọ
●Tg ti o ga, ti ko ni idari ati laini halogen, Aarin Tg
●Rere otutu olùsọdipúpọ resistance
| Iyasọtọ | Ẹyọ | Ibeere | Ọna Idanwo | |||||
| Sisanra ipin | Um | 12 | 18 | 35 | 70 | 105 | IPC-4562A | |
| Iwọn Agbegbe | g/m² | 107±5 | 153±7 | 285± 10 | 585± 20 | 870±30 | IPC-TM-650 2.2.12.2 | |
| Mimo | % | ≥99.8 | IPC-TM-650 2.3.15 | |||||
| aibikita | Apa didan (Ra) | sm | ≤0.43 | ≤0.43 | ≤0.43 | ≤0.43 | ≤0.43 | IPC-TM-650 2.3.17 |
| Ẹka Matte (Rz) | um | ≤6 | ≤8 | ≤10 | ≤15 | ≤20 | ||
| Agbara fifẹ | RT(23°C) | Mpa | ≥207 | ≥207 | ≥276 | ≥276 | ≥276 | IPC-TM-650 2.4.18 |
| HT(180°C) | ≥103 | ≥103 | ≥138 | ≥138 | ≥138 | |||
| Ilọsiwaju | RT(23°C) | % | ≥2 | ≥2 | ≥3 | ≥3 | ≥4 | IPC-TM-650 2.4.18 |
|
| HT(180°C) | ≥2 | ≥2 | ≥2 | ≥3 | ≥3 | ||
| Resistivity | Ω.g/m² | ≤0.17 | ≤0.166 | ≤0.16 | ≤0.162 | ≤0.162 | IPC-TM-650 2.5.14 | |
| Agbara Peeli (FR-4) | N/mm | ≥0.9 | ≥1.1 | ≥1.4 | ≥2.0 | ≥2.0 | IPC-TM-650 2.4.8 | |
|
| lbs/in | ≥5.1 | ≥6.3 | ≥8.0 | ≥11.4 | ≥11.4 | ||
| Pinholes & porosity | Nọmba | No | IPC-TM-650 2.1.2 | |||||
| Anti-oxidization | RT(23°C) |
| 180 |
| ||||
| RT(200°C) |
| 40 |
| |||||
Iwọn Iwọn, 1295 (± 1) mm, Iwọn Iwọn: 200-1340mm.Le ni ibamu si telo ibeere alabara.
A ṣe idanwo agbara peeli pẹlu prepreg FR-4(Tg140), jọwọ tun jẹrisi pẹlu pp rẹ.
